HOT STAMP MARKERS
Marking on all types of tubing, cable ties, etc., with a permanent
MIL-Spec imprint. Marking can be completely customized with logos,
part numbers, date codes and serial numbers. Orders of any size can
be processed and shipped normally within 1-2 weeks.
HEAT SHRINK PVC
An excellent electrical insulator and the lowest shrink temperature
of all tubings. It maintains a high degree of flexibility and resists
most chemicals and oils. Operates up to 105C and is U/L recognized.
HEAT SHRINK POLYOLEFIN
A highly flexible, radiation cross-linked tubing used for insulating,
jacketing and bundling of wire harnesses and components. Made from
flame retardant polyolefin, it has excellent electrical, chemical
and physical properties. Polyolefin operates in temperatures up to
135C and is U/L recognized.
HEAT SHRINK KYNAR
An irradiated thin wall tubing offering a high degree of mechanical
strength and operating temperatures up to 175C. Kynar is inherently
flame-retardant and semi-rigid and has outstanding abrasion and cut
through resistance.
HEAT SHRINK MYLAR
Mylar is a thin wall material with a superior, high dielectric for
insulating components. It requires a low shrink temperature of 90C
and operates in temperatures up to 150C.
DUAL WALL POLYOLEFINS
Adhesive lined - A flexible Heat shrinkable Polyolefin (110C)
lined with a thin layer of special thermoplastic adhesive for excellent
moisture protection and strain relief. Available in 2:1, 3:1 and 4:1
shrink ratios.
Melt Wall - A semi-rigid Heat Shrinkable Polyolefin (110C)
over a meltable inner wall, that will encapsulate components when
heat is applied. This material also is excellent for moisture protection.
HEAT SHRINK LAYFLAT PVC
A thin wall, low cost material made of PVC that offers good electrical
and mechanical characteristics. Layflat PVC is available in diameters
from 1/4" to 6" and larger with wall thickness from .002" to .012".
HEAT SHRINK NEOPRENE & HEAT SHRINK VITON®
Heat shrink Neoprene is a highly flexible thick wall tubing that can
operate in severe environmental conditions. It provides superior abrasion
resistance and chemical resistance while operating in temperatures
up to 121C. Viton® offers the same outstanding properties found in
Neoprene with the addition of high temperature performance up to 200C.
|
HEAT SHRINK
AND EXTRUDED TEFLON
Available in TFE and FEP, both are excellent in high temperature applications,
corrosive atmospheres, electrical insulation and as a lubricant. TFE
has the widest operating temperature range of any plastic at -250C
to 260C, while FEP is at -200C to 204C.
SPECIAL SERVICES
CUTTING AND BAGGING
Our cutting equipment can accommodate any size and type of tubing
and sleeving while maintaining extremely tight tolerances. We can
do special bagging of any quantity of cut pieces.
CUSTOM PACKING
Private labeling or any type of custom packaging can be done to meet
your specific needs.
FIBERGLASS SLEEVING
Designed for heat resistance and dielectric strength, sleevings can
be coated with a variety of materials to meet specific thermal and
dielectric requirements. Available in heat-treated, 650C, and in common
coatings of: Vinyl Coated, 130C; Acrylic Coated, 155C and Silicone
Coated, 200C. The dielectric strength of the coated Fiberglass sleeving
is determined by the grade of the material (coating thickness).
EXTRUDED PVC
Designed for electrical, general-purpose bundling, fluid transfer
and many other uses. Available in a high temperature material, -50C
to 105C, and a low temperature of -68C to 80C. The 105C PVC is U/L
recognized material.
EXPANDABLE SLEEVING
Made of Polyester, Expandable sleeving is designed to expand and adjust
to irregular shapes to protect cable and wire assembles. Standard
Polyester expandable sleeving is U/L recognized up to 125C. A flame-retardant
version is also available.
CABLE TIES
Available in a flat single loop version for one time usage and in
beaded form for adjustable or re-use applications. Length of ties
range from 3.5" to 45" long. Also available are double loop ties,
identification ties, mounting cable ties, mounting bases and installation
tools.
SLIT CORRUGATED CONDUIT
Slit conduit is an easy-to-use protection for wire, cable and hoses.
The lengthwise slit allows for quick installation of an assembly.
Made of both Polyethylene 90C and of Nylon 130C and is also available
without a slit.
SPIRAL WRAP TUBING
Spiral wrap is a spiral cut expandable Polyethylene tubing designed
to hold wire assemblies that allows individual wires to enter or exit
at any point on a harness.
HEAT SHRINK AND ADHESIVE
Heat shrink polyolefin tape is designed to insulate and seal areas
where tubing can not be applied. Adhesive tapes made for standard
applications include: electrical tape, Industrial vinyl tape, Duct
tape, etc, and are in stock. In addition, specialty tapes such as
Polyester film tapes, Nomex, Glass cloth, Copper-foil and Teflon tapes
are also available.
|
Insulation Products
Corporation has been providing its customers with superior electrical
insulating products since 1974 and prides itself on quick, courteous
service. Our large inventory ensures orders can be shipped within
24 hours and our technical staff, including engineering personnel,
can assist in developing solutions to your requirements. 