Home Page
About IPC
Products
Specifications
Feedback

HEAT SHRINK TUBING

HS-PVC

Description MIL Spec Approvals

Standard Wall

M23053/2 Class 2 U/L VW-1 & CSA OFT
1/32" Wall   U/L VW-1 & CSA OFT
Irradiated M23053/2 Class 1 U/L VW-1 & CSA OFT
Layflat    


HS-Polyolefin

Description MIL Spec Approvals
Standard Wall M23053/5 Class 1,2 & 3 U/L VW-1 & CSA OFT
Very Flexible R46846 Type 5 U/L & CSA
Thin Wall U/L VW-1 & CSA OFT
Semi-Rigid M23053/6 Class 1 & 2 U/L
Melt Wall M23053/4 Class 1
Adhesive lined M23053/4 Class 2 & 3
Heavy Wall Adhesive lined M23053/15 Class 1 & 2

HS-Teflon

Description MIL Spec Approvals
TFE M23053/12 Class 1,2,3,4 & 5
FEP M23053/11 Class 1 & 2

HS-Kynar

Description MIL Spec Approvals
Kynar M23053/8 U/L VW-1 & CSA OFT

HS-Mylar

Description MIL Spec Approvals
Mylar M23053/7 Class 2

HS-Neoprene

Description MIL Spec Approvals
Neoprene M23053/1 Class 1 & 2
R46846 Class 1

HS-Viton*

Description MILL Spec Approvals
Viton* M23053/13
R46846 Class 1

Other Shrinkage Products

End Caps / Molding Parts
Large Dia. Pipe Tubing
Solder Sleeves

Non-Shrink Tubing

Teflon

Description Mill Spec Approvals
TFE M22129C
FEP

PVC

Description Mill Spec Approvals
Standard Wall M631D Grade C U/L VW-1 & CSA OFT
1/32" Wall U/L VW-1 & CSA OFT
Fractional Wall FDA Grade
Low Temperature M7444 Type 1 & 3

Sleeving

Description Mill Spec Approvals
Heat Treated Fiberglass U/L
Vinyl Coated Fiberglass M3190 U/L
Acrylic Coated Fiberglass M3190 U/L
Silicone Coated Fiberglass M3190 U/L
Expandable Polyester

Slit Corrugated Conduit

Spiral Wrap

Other Products

Tape
Tie Wraps

Special Services

Host Stamp Marking MIL-M-81531
Cutting To Length
Special Packaging/Kitting


*Viton is a registered trademark of DuPont Dow Elastomers





Home / About Us / Products / Specifications / Feedback
©2007. IPC Insulation Products Corporation. All Rights Reserved.