Melt Wall Polyolefin Tubing

Meltable inner liner for encapsulating

Product Number IP42MW

  • Semi-rigid
  • Encapsulating
  • High shrink ratio

Meltable inner liner for encapsulating.

Melt Wall Polyolefin Tubing is a semi-rigid heat shrinkable tubing that is co-extruded and selectively
cross-linked to provide a tough protective outer shrinkable jacket with a meltable inner wall.

With the application of heat in access of 135°C the inner wall melts and is forced by the outer wall to flow in and around all underlying surfaces and small voids. When cool, the tubing becomes one solid mass excellent for encapsulating delicate components from moisture and the attack of chemicals and solvents.

Melt Wall Polyolefin Tubing is recommended for a wide variety of electronic, electrical and mechanical applications…wherever a highly reliable one-step approach to jacketing, encapsulation and environmental sealing is required.

AMS-DTL-23053/4 Class 1
AMS 3634
U/L Approved
Shrink Ratio:
2.5:1
Longitudinal Shrinkage:
+1/-10%
Continuous Operating Temp:
-55°C to 110°C
Shrink Temperature:
135°C
Colors:
Black standard – others on quote

Specifications:

Order SizeExpanded DiameterRecovered DiameterRecovered Wall
1/8.125.023.038
3/16.187.060.043
1/4.250.080.047
3/8.375.135.050
1/2.500.195.055
3/4.750.313.065
1″1.000.400.075

 

Download Our Spec Sheet